smd led lamp bl - ls0805 xx approved : xu l checked : zhang wh drawn: li fs rev no: v.2 page 1 of 5 www .betlux.com email: sales@betlux.com , betlux@betlux.com features: ? 2.0mmx1.25mm smd, 0.8mm thickness ? mono - color type ? compatible with automatic placement equipment ? wide viewing angle. ? ideal for backlight and indicator. ? package: 4 kpcs/reel ? rohs compliance n electrical - optical characteristics: (ta=25c) (test condition: if=20ma) chip forward voltage(vf) unit:v luminous intensity (iv) unit:mcd part number emitted color material l p (nm) lens type typ max min. typ. viewi ng angle 2?1/2 (deg) bl - ls0805hc red gap 700 2.2 2.7 0.3 0.9 bl - ls0805src super red algaas 660 1.85 2.30 5 13 bl - ls0805lrc super red algaas 660 1.85 2.30 10 28 bl - ls0805ec orange gaasp 640 2.10 2.70 1 6 bl - ls0805yc yellow gaasp 583 2.15 2.70 1 6 bl - ls0805gc green gap 568 water clear 2.30 2.70 6 15 130 n absolute maximum ratings (ta=25c) parameter h sr lr ur e y g unit forward current i f 30 30 30 30 30 30 30 ma power dissipation p d 65 7 8 78 78 65 65 65 mw reverse voltage v r 5 5 5 5 5 5 5 v peak forward current i pf (duty 1/10 @1khz) 100 100 100 100 100 100 100 ma operation temperature t opr - 30 to +80 c storage temperature t stg - 40 to +85 c lead soldering temperature t sol max.260 5 c for 3 sec max. (1.6mm from the base of the epoxy bulb) c
smd led lamp bl - ls0805 xx approved : xu l checked : zhang wh drawn: li fs rev no: v.2 page 2 of 5 www .betlux.com email: sales@betlux.com , betlux@betlux.com n electrical - optical characteristics: (ta=25c) (test condition: if=20ma) chip forward voltage(vf) unit:v luminous intensity (iv) unit:mcd part number emitted color material l p (n m) lens type typ max min. typ. viewi ng angle 2?1/2 (deg) bl - ls0805udr ultra red algaas 655 2.10 2.50 22 55 bl - ls0805uhr ultra red algaas 645 2.10 2.60 30 80 bl - ls0805uec ultra orange algaas 630 2.10 2.50 30 70 bl - ls0805uhd ul tra orange algaas 618 2.10 2.60 50 110 bl - ls0805uyo ultra amber algainp 610 2.10 2.60 30 70 bl - ls0805uyc ultra yellow algainp 593 2.10 2.60 25 75 bl - ls0805ugc ultra green algainp 575 2.20 2.70 10 45 bl - ls0805pgc ultra pure green ingan 525 3.50 4.20 50 100 bl - ls0805bgc ultra bluish green ingan 505 3.50 4.20 50 110 bl - ls0805dnb blue ingan 470 3.50 4.20 10 38 bl - ls0805ubc ultra blue ingan 470 3.50 4.20 10 30 bl - ls0805uwc ultra white ingan / water clear 3.50 4.20 40 200 130 n absolute maximum ratings (ta=25c) parameter udr uhr ue uhd uyo uy ug pg bg dnb ub uw unit forward current i f 30 30 30 30 30 30 30 30 30 30 30 30 ma power dissipation p d 78 78 78 78 78 78 78 78 78 78 78 78 mw reverse voltage v r 5 5 5 5 5 5 5 5 5 5 5 5 v peak forward current i pf (duty 1/10 @1khz) 100 100 100 100 100 100 100 100 100 100 100 100 ma operation temperature t opr - 30 to +80 c storage temperature t stg - 40 to +85 c lead soldering temperature t sol max.2605 c for 3 sec max. (1.6mm from the base of the epoxy bu lb) c
smd led lamp bl - ls0805 xx approved : xu l checked : zhang wh drawn: li fs rev no: v.2 page 3 of 5 www .betlux.com email: sales@betlux.com , betlux@betlux.com n package configuration & internal circuit diagram notes: 1. all dimensions are in millimeters (inches) 2. tolerance is 0.25(0.01")unless otherwise noted. 3. specifications are subject to change without notice.
smd led lamp bl - ls0805 xx approved : xu l checked : zhang wh drawn: li fs rev no: v.2 page 4 of 5 www .betlux.com email: sales@betlux.com , betlux@betlux.com n tape specifications 1.00 ? 0.01 unit o mm tolerance o ? 0 . 1 9 ps 5 8.00?0.20 1.75?0.10 3.50?0.05 1.40 ? 0.10 4.00?0.10 4.00?0.10 2.00?0.05 1.50+0.10/-0 cathode mark 2.30 ? 0.10 1.10 ? 0.10 0.23?0.05 178?1.0 60+0.5/-0 13.5?0.5 9.0?0.5 12.0?0.15 label sticking position
smd led lamp bl - ls0805 xx approved : xu l checked : zhang wh drawn: li fs rev no: v.2 page 5 of 5 www .betlux.com email: sales@betlux.com , betlux@betlux.com n typical electrical - optical characteristics curves: 1.0 0.5 0 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 (a) (b) (c) (d) (2) (3) (8) (4) (1) (6) (5) (9) (10) wavelength(nm) relative intensity vs wavelength() |? p (1) - gaasp/gaas 655nm/red (2) - gap 570nm/yellow green (3) - gaasp/gap 585nm/yellow (4) - gaasp/gap 635nm/orange & hi-eff red (5) - gap 700nm/bright red (6) - gaalas/gaas 660nm/super red (8) - gaasp/gap 610nm/super red (9) - gaalas 880nm (10) - gaas/gaas & gaalas/gaas 940nm (a) - gan/sic 430nm/blue (b) - ingan/sic 470nm/blue (c) - (d) - ingan/sic 505nm/ultra green ingaal/sic 525nm/ultra green 50 40 30 20 10 0 1.2 1.6 2.0 2.4 2.6 3.0 1 6 3 4 5 2 8 4.0 3.0 2.0 1.0 0 20 40 60 80 100 1 5 b 50 40 30 20 10 0 20 40 60 80 100 1 6 2,4,8,a 3 5 3 2 1 0.5 0.2 0.1 -30 -20 -10 0 10 20 30 40 50 60 70 1 5 4 2 3 10 9 8 7 6 5 4 3 2 1 1 10 100 1000 10,000 10khz 3khz 1khz 300khz 100khz f-refresh rate 100khz 30khz 10khz 3khz 1khz 300hz 100hz 10 9 8 7 6 5 4 3 2 1 1 10 100 1000 10,000 forward voltage (vf) forward current vs. forward voltage relative luminous intensity vs. forward current ambient temperature ta() ?? forward current vs. ambient temperature tp-pulse duration us (1,2,3,4,6,8,b.d.j.k) note:25 free air temperature unless otherwise specified ?? tp-pulse duration us f o r w a r d c u r r e n t ( m a ) forward current (ma) r e l a t i v e l u m i n o u s i n t e n s i t y f o r w a r d c u r r e n t ( m a ) r e l a t i v e l u m i n o u s i n t e n s i t y ambient temperature ta() ?? (5) i p e a k m a x . i d c m a x . i p e a k m a x . i d c m a x .
|
